Homebrew PROTOGEN Species Details

A protogen has a back face with lights showing the mouth and eyes however the mouth nor eyes are real it just shows where the protogen is looking and were the mouth would be. The colours of these lights are anywere between red-green-blue, all the colours (never dark colours). Some protogens have air thrusters on their backs that allow for hovering and flying up. Some will have tail fins and fins on other parts of their body to maximize swimming speed. Some protogens will have special hairs on their nails that are barely visible and allow for good gripping. All protogens have a logo at the low middel of the part were their "face" connects to the artificial back head. Protogens will have 1-3 sets of ears and sometimes partially transperant horns or the horns will glow. Some protogens have no horns. The breast is always a metal plating of aluminium, titanium, small bits of diamond and some other materials that are know or unkown. Different genders of protogens will have different shapes for the breast. The beginning of the protogens arms are metal with the protogen's logo on it. The hands of a protogen have 5 fingers with opposable thumbs. The nail is much larger as 48% the fingers are a metal-keratin material sometimes with special hairs to allow climbing. The large nails are luckily not a downside as the can still wield weapons like normally. The middle of a protogen will sometimes be metal (partially about 40%) for thrusters to boost upwards. These thrusters are air thrusters and cannot bring the protogen higher than 50 meters from the ground. The thrusters are always connected to the breast plating. A protgen's waist is metal on the back only if they have thrusters some protogens have no metal on their waist. Below their waist is metal and the legs start in large ovals that go down to were the knees should be. below the knees is like the arms and hands, the toes being 60% smaller than the fingers. Once again 48% of the toes are the mix of metal and keratin. On the ovals that make up the higher part of the legs is a logo (every single logo on a protogen is the same but every protogen has a different one). There is a tail protruding from the back wich sometimes has fins for swimming faster (this alows for regular movement and sprinting in water). Near the tip of their tail there will be a logo. The tail will be about 1 meter to 1.5 meters long. Some protogens will have bioluminecent fins. These bioluminecent fins are usualy green-blue. but most commonly the fins match the face and logo colour (the logo has that same colour as the face). Protogens have fur like a cat sometimes short somtimes long but a protogen is never hairless. The colour of the fur is usually a light grey and white. but sometimes the fur colour is a really light version of the protogens logo and face colour.

The average hight of a protogen is somwere between 2-3 meters. the average weight of a protogen is 400-600 pounds (180-272 kg).

Were the heart is located on the inside the protogen has a reactor that will produce energie without requiring materials. A protogen must enter a meditation state that is like resting to recharge spells and hp. a protogen can heal scratches on the metal just like a normal human could. 

due to the metal protogens are made of protogens suck up all the lighting around them in a 10 ft radius. the protogens are immune to lightning and will remain fine even after being hit by a 9th level lightning bolt.

PROTOGEN Traits

your metalic body gives a asortment of bonuses

replaceable body

your body allows you to re attach or grow destroyed limbs.

if a arm lets say is cut of from the core the body can re attach the arm or if it is completly destroyed the body can go in a meditation state for 16 hours and the limb will be manufactured again.

if all but the core remains in tact the core will go into a autonomous rest state for up to 1d4 days. once those days are complete the core will have manufactured a copy of the body around it. the protogen retains all of its memories as its soul is stored in the core. to utterly destroy a protogen is to destroy the core. the core can only be destroyed by a wish spell. but the core has to belong to a creature that has a evil or choatic nuetral alingment. a core of a good protogen can only be destroyed for 13 days with such wish spell before reforming were it last was. it than grows a new body but under a ivisibility veil so it can not be seen.

regenerative body

at 10th level the protogen can heal 1d10+(level) per 2 rounds. if the protogen is knocked unconscious it cannot becom conscious. 

body bonuses

bonuses on strength, constitution, dexterity and inteligence

electric outburst

you explode with a high voltage electric shock that damages nearby enimies of your choice