Level
2nd
Casting Time
1 Action
Range/Area
60 ft.
Components
V, S
Duration
Instantaneous
School
Transmutation
Attack/Save
None
Damage/Effect

You cause a pillar of stone to rise from the ground in a space you can see. The pillar of stone has a diameter of 5 feet and raises up to 30 feet into the air. The ground where a pillar appears must be wide enough for its diameter, and you can target the ground under a creature if that creature is Medium or smaller.

If a pillar is created under a creature, that creature must succeed on a Dexterity saving throw or be lifted by the pillar. A creature can choose to fail their save. If a pillar is prevented from reaching its full height because of a ceiling or other obstacle, a creature on the pillar takes 3d8 bludgeoning damage and is restrained pinched between the pillar and the obstacle. The restrained creature can use an action to make a Strength or Dexterity check (the creature's choice) against the spell save DC. On a success, the creature is no longer restrained and must either move off the pillar or fall off it.

The pillar has AC 5 and 30 hit points. When reduced to 0 hit points, a pillar crumbles into rubble, which creates an area of difficult terrain with a 10-foot radius that lasts until the rubble is cleared Each 5-foot-diameter portion of the area requires at least 1 minute to clear by hand.

The pillar can be created on any natural terrain. It must come from the ground and can break through some types of flooring (such as wood). Certain types of stone flooring could also be used to create the pillar, but some types of flooring determined circumstantially by the GM may not be used. 

Available For: Druid (Legacy) Sorcerer (Legacy) Wizard (Legacy)

NILLAxPUDDINx

Comments

Posts Quoted:
Reply
Clear All Quotes