Level
1st
Casting Time
1 Action
Range/Area
Touch 3 ft.
Components
V, S, M *
Duration
Until Dispelled 2 Rounds
School
Abjuration
Attack/Save
None
Damage/Effect
Control (...)

You inscribe a rune onto a surface, this surface can be any solid object or willing creature.
A max of 3 runes may be on any surface.

You set the trigger to be anything, you can also manually trigger the rune if you are within 300ft of it, any form of manually triggering, such as trigger words must obey this rule and all other manual trigger rules, unless triggered by other creatures or objects, or a mechanical device, such as a lever.

The caster must maintain concentration on the spell for 1 minute for the rune to be permanent.

Each rune can one spell with a max level of (Spell level-1) on it. (So a rune cast at level 3 could have a max of a level 2 spell inscribed on it)

The rune can not have another Inscribe Rune spell or on it.

When inscribing a spell onto a rune, it takes the spell slot and material components of the spell being inscribed

Any spell cast via the rune ignores spell slots and material components (not counting the inscribing cost)
It is an object action to activate a rune a creature is in physical contact with.

You can also see through the rune as long as there are no spells and you are within 100 ft of it or have a chain of runes that have no spells and are no further apart than 100ft.

You may also link runes to activate together.
In the event of a spell that can be controlled or has multiple effects, you may set an effect to happen or have a rune on a separate surface that whoever is in contact with the rune can control the spell with.

This spell does not consume any spell slots (besides the one used to cast this spell) if used with cantrips through level 4 spells, permitted that the caster has access to spells at least 2 levels higher.

Any creature within 10 ft of the rune knows where it is if it is not covered, and it is able to be seen clearly from where the creature is standing (i.e. no walls or creatures in the way),  the caster can consume (100 * Spell level^2) gp of any material to hide it without covering it. When a rune is covered it can only be seen by either a passive perception over 20, or a dc(21-spell level) investigation check. The rune is completely undetectable if covered or out of sight. Only 1 check may be made for any creature. The rune's caster may choose to make the rune stay visible to any creatures if the caster so wishes.


The rune ignores concentration and max times for spells that do not directly cause damage or summon any creatures , the caster may include a shut-off for the spell or manually do so at no cost.

 

(Class specific features)
Bards can talk and hear through an empty rune while looking through it, and may apply bardic inspiration through it.
Clerics can use channel divinity through an empty rune.

* - (50gp worth of a powder made from a blue gem per spell level, or a mix of powdered diamonds, lapis, and mithril combined with tar.)

Previous Versions

Name Date Modified Views Adds Version Actions
12/6/2024 12:05:18 AM
11
1
A.1.0
Coming Soon
12/11/2024 2:43:20 AM
34
1
A.1.5
Coming Soon
12/16/2024 5:18:57 AM
39
1
A.1.5.5
Coming Soon
6/5/2025 5:47:49 PM
48
2
A.2.0
Coming Soon

Spell Tags: Damage Control

Available For: Artificer (Legacy) Bard Cleric Druid Paladin Ranger Sorcerer Warlock Wizard

Custoss96302

Comments

Posts Quoted:
Reply
Clear All Quotes