Spell Spotlight: Conjure Animals
“I cast conjure animals!” declared the druid. Magic flashed in his eyes, and eight snarling wolves appeared around him, their fur shimmering with fey magic.
“Oh hell,” groaned the Dungeon Master. She looked up from her notes at her players, and she suddenly seemed very tired. “Time out, team. I need to go through a few books. Paul, do you need a Monster Manual?”
“No, I uh,” the druid’s player glanced up from his Player’s Handbook as he frantically flipped through the appendices. “I think I’ve got it. I just need to, uh, roll initiative, I think.”
The fighter’s player looked at her DM and grimaced apologetically. “I’m gonna go to the bathroom, is that cool?”
So you cast conjure animals, or one of your players did, and now everyone’s stopped in the middle of combat to check the rulebooks. Maybe you’ve summoned eight wolves and now you’re controlling nine different characters in combat, and all of your friends are twiddling their thumbs and waiting for you to stop hogging the spotlight and to let them play some D&D.
This all-too-common situation sucks, but it doesn’t have to be this way. There was a great discussion last week about the role of creature-conjuring spells and the druid class last week in the comments of Druid 101: A Beginner’s Guide to Channeling Nature’s Might. I opted against including conjure animals in my list of recommended spells, which garnered some confusion from optimization-focused readers. It’s true, spells that summon other creatures are incredibly powerful. They’re also extremely newbie-unfriendly, and I didn’t feel comfortable recommending it to new players in a 101-level guide.
But that’s just avoiding the issue. Sooner or later, people are going to pick up conjure animals, conjure minor elementals (which I talked about previously in Spell Spotlight: Conjure Minor Elementals), conjure woodland beings (which is rife for abuse in its own way), or any of the other spells that summon multiple creatures to aid you. And when that happens, both players and DMs alike will need to understand the impact of these spells so they don’t negatively impact their entire group’s play experience.
What’s the Big Deal?
In order to solve the problems with conjure animals and its ilk, we need to understand why this spell creates problems at the table. Conjure animals is a very powerful spell, but that’s by design. 3rd-level spells like fireball are supposed to mark a huge increase in power for their casters. Its problems lie elsewhere.
Certain creature-conjuring spells give the caster a limited choice of what creatures to summon. Conjure animals allows its caster to summon one of the following:
- One CR 2 beast
- Two CR 1 beasts
- Four CR ½ beasts
- Eight CR ¼ beasts
Summoning spells are typically at their most powerful when they summon as many creatures as possible. Action economy is so important in encounter design that often simply being able to perform lots of attacks or other actions is more powerful than making one or two powerful attacks. Even against overwhelming odds, fights in D&D are usually determined by one side outnumbering the other. Summoning 8 wolfs is one of the most optimal uses of the spell, since even though these creatures are individually weak, their Pack Tactics trait grants them advantage on just about every attack, and they can knock enemies prone. Even though the saving throw to resist being knocked prone is only DC 11, even high-level creatures are bound to roll a 1 eventually, and eight chances of knocking your enemy prone per round can really wring the low rolls out of a die.
The problem—that conjure animals and similar spells dramatically slow down play—manifest in many ways. First, creating lots of monsters creates a long player turn. This in turn causes a social dilemma in which one player hogs the spotlight. Many of the solutions to these former two problems create more work for the DM, disrupting their fun and further slowing down the game. It also creates a headache when fighting in cramped quarters, because beasts crowd the battle map. A fifth issue is that the ease with which this spell is dispelled can render this investment of time a waste. Let’s take a quick look at each of these in turn.
Long Turns and Hogging the Spotlight
When a character casts conjure animals, the summoned creature or creatures roll initiative and get their own turn, and all creatures summoned by that casting of the spell act on the same initiative—essentially giving the caster another turn in combat! However, this second turn has the power to be even longer and more complicated than the caster’s own turn, since as stated above, the most powerful way of using creature-summoning spells is usually to summon as many creatures as possible.
If a character ends up summoning 8 wolves, that player is now suddenly controlling 9 individual units. Even if the wolves are simple to command, that’s 8 additional movements, 8 additional actions (and possibly 16 extra d20 rolls, thanks to Pack Tactics granting advantage to their attacks), with the DM rolling a Strength saving throw for every successful attack, potentially ballooning that number to a monumental 24 extra d20 rolls made per round thanks to one spell.
The summoner can help mitigate this by planning their turn in advance, but even with all that prepared ahead of time, all that dice rolling will still drag the game to a standstill. By gaining a second turn in combat and making that turn take longer than most other players’, this presents a social problem as well: hogging the spotlight.
Solution (Player): As a player, the easiest way to solve this problem is to just summon a single CR 2 creature instead of a bunch of weak creatures—but this solution might not please everyone. It’s giving up a lot of the spell’s power in exchange for an easier and more fun play experience. If you really want to summon all 8 beasts, you should do everything in your power to make your additional turn go as quickly as possible. Before your conjured creatures’ turn, prepare the following:
- Exactly where each creature goes and what action it will take.
- If it’s performing an action that requires one or more die rolls, such as attacking or making an ability check, make all the rolls in advance. If you’re attacking, roll the d20 to hit and the d4s for damage at once. If you and your DM really trust each other, consider asking to roll the d20 for the creature’ Strength saving throw, too.
If you want to avoid hogging the spotlight, instead of having your summoned beasts act on their own turn, consider asking your fellow players if they want to play as the beasts in addition to their own characters. This house rule lets other players have fun with your spell by letting them play the beasts on their own turns, in addition to their character. This giving them more tactical choice, and spreads the turn time around more evenly than just giving you an extra turn.
Solution (Dungeon Master): As a Dungeon Master, if your druid constantly summons the maximum number of creatures, you could treat those 8 wolves as a mob, rather than individual creatures, in order to reduce the amount of time spent rolling dice. Rules on how to use mobs and make mob attacks are found in Chapter 8 of the Dungeon Master’s Guide. Be sure to talk to your player before changing the rules on them. They expect the game to be played a certain way, and changing that without explanation can be incredibly frustrating.
Overworking the Dungeon Master
Let’s face it: Dungeon Masters have a lot on their plate to think about already. In combat, the DM is playing all the monsters and keeping all of their spells and unique abilities in their head, keeping track of terrain hazards and hidden traps, and perhaps most importantly, keeping track of all of the players’ abilities so that they can tailor challenges to their strengths and weaknesses. The list goes on, of course.
Here’s something most people don’t know about conjure animals and similar spells: the caster doesn’t get to choose what creatures get summoned. Let me say that once more for the people in the back: the caster doesn't get to choose the exact creatures conjured by their spell. By the text of the spell, the player only chooses the number of creatures summoned and their challenge rating; the DM does all the rest. This is further supported by Jeremy Crawford’s Sage Advice (page 13 of this PDF), in which he says, “The design intent for options like these is that the spellcaster chooses one of [the listed challenge rating options], and then the DM decides what creatures appear that fit the chosen option.”
You may choose to allow players to select exactly which creatures appear, but understand that you’re actively changing the way the spell works. Empowering the DM to choose what creatures appear instead of the player is one of the spell’s balancing factors—but it’s also a big problem for DMs who aren’t prepared to suddenly choose a bunch of creatures. If you’re a DM, can you name any CR ½ beasts without looking them up? More than one? Even if you can, does the caster have the stats, or will you have to hand them your Monster Manual so they can play the four CR ½ crocodiles that just appeared?
Solution: Fortunately, the D&D Beyond Monster Finder makes finding creatures of a specific type and challenge rating quicker and easier than it was with just books. If you know you have a character that has conjure animals or a similar spell prepared, it might be worth it to keep a tab of the Monster Finder open at all times.
Crowding the Battlefield
Putting lots of new miniatures on the board to represent the conjured creatures takes time, but we’ve driven the “conjure animals wastes time” point into the ground by this point. More troublesome is how they make it impossible for anyone to navigate the battlefield.
When fighting in a 10-foot-wide dungeon corridor, summoning eight CR ¼ beasts and winding up with a herd of cows blocking your path is—I admit, very funny—but also a big problem for the DM and for other players. Suddenly, allies and enemies alike are unable to wade through the sea of animals clogging up the battlefield. Remember that space occupied by another creature, even a non-hostile one, counts as difficult terrain!
When in a field full of rolling hills, this concern vanishes into smoke. There’s lots of room for everyone to navigate. Consider a middle ground, like Great Cavern in Wave Echo Cave from the D&D Starter Set.
Area 9, the Great Cavern, is already filled with seven ghouls. It’s a fairly spacious cavern, but it’s divided into three sections, two raised platforms on the east and west of a depressed central chamber. All seven ghouls “lurk in the shadows on the western ledge,” and most parties will be walking straight through the central chamber. The battle will very quickly descend into a frantic melee in the middle, as all seven ghouls use their bite and claws to tear into the PCs, essentially removing the spacious east and west ledges from the fight.
Even the central chamber, with its spacious 10-foot squares, would get very crowded very quickly by the sudden appearance of 8 Large-size cows milling about, in addition to the seven ghouls and four-to-six adventurers. At that point, the battlefield becomes cluttered and hard to interpret at a glance, which further slows down combat, and makes it difficult for both heroes and villains to move tactically, thanks to all the opportunity attacks that could be thrown around. Even with the eastern and western wings of this room free of bodies, it doesn’t make sense for either side to retreat there, since the ghouls want to stay in melee, and the characters will have a hard time navigating the sea of non-hostile difficult terrain and hostile opportunity attackers.
Solution: This is a particularly vexing problem for groups that use miniatures and grids to engage in tactical combat. There isn’t an easy solution for it, but it is a point in favor of using Theater of the Mind combat instead of gridded combat. If your gaming group has been having a problem with conjure animals crowding the game board, consider playing a few combats in Theater of the Mind instead of with miniatures.
Alternatively—and this one is a house rule—you could consolidate the conjured animals into a single space as a herd or a pack, not unlike how swarms work in fifth edition D&D. A pack of eight Medium creatures (like wolves) count as a single Huge creature, and fit into a 3x3 space, whereas a swarm of eight Large creatures (like cows) count as a single Gargantuan creature, and fit into a 4x4 space.
This solution doesn’t actually create a swarm, since swarms have a few unique traits and consolidate hit points and attacks in a way that would just make a DM’s life harder when adjudicating gameplay on the fly. Conjured animals in a pack move as one and can surround another creature, but attack individually as usual. This mitigates the problem of the beasts cluttering up the battlefield by putting them in a tidy block, with the slight downside of restricting the granularity of their movement.
Dispelling Conjure Animals
Conjure animals may be extraordinarily powerful and—in some cases—extraordinarily annoying, but it’s actually quite easy to remove these animals from the battlefield in most situations. There are three main ways to counteract the effects of this spell: direct damage, magic removal, and breaking concentration.
The most obvious way to deal with the beasts summoned by conjure animals is to just kill them. If the caster summons eight wolves in a clump, a single fireball could easily wipe them all out—though casters can easily fireball-proof their casting by spreading out their conjured creatures. Generally speaking, though, killing the conjured animals one-by-one is the least efficient way of dealing with them.
Magic removal like dispel magic is actually ineffective against conjured creatures. Dispel magic ends ongoing magical effects, but conjure animals is an instantaneous effect that causes one or more creatures to appear. Counterspell can negate the casting of conjure animals in the first place, but it’s still a fairly inefficient route. You’re just trading one of your 3rd-level spell slots for one of theirs.
Breaking the caster’s concentration is the most efficient, but least consistent, method of dealing with conjured creatures. In some cases, the caster may simply wish to use a different spell that requires concentration—and fortunately, the vast majority of druids’ powerful spells do require concentration! If you absolutely have to end their concentration on conjure animals as soon as possible, focusing fire on the druid will do the trick. Even if you’re needling the caster with tiny attacks, they’re bound to fail a DC 10 Constitution saving throw eventually. And as soon as their concentration drops, the spell ends and every single conjured creature disappears instantly!
Tinkering with Troublesome Spells
Most of the advice here applies to other spells that conjure creatures, but they all have their own strengths and weaknesses. Conjure animals gets a lot of bad press because it sits right at a “break point” of power in D&D, the transition between 1st tier and 2nd tier play. This is the point where D&D becomes harder to run for most DMs, since characters begin to acquire more and more powerful and complex powers. With this in mind, the best advice I can give to players and DMs in D&D games with 2nd-tier or stronger characters is to keep practicing and keep playing. The more experience you have and the more you work with your players to improve your game, the more fun you’ll have.
And if there’s a part of D&D that isn’t working for you, like one spell that ruins your fun no matter how much you try to make it fit into your game… drop it! The rulebooks are meant to be a toolkit to run the game in a way that helps you and your friends have fun together. There’s nothing inherently virtuous about playing by the book, save for consistency of expectations between gaming groups. If you lay out proposed houserules (like “the spell conjure animals doesn’t exist in my game”) to your fellow players beforehand and they all agree with it, then you’ve successfully created a new expectation for your game and your game alone.
If you’re a game designer (aspiring or established) or an Adventurers League DM, it’s well worth your while to learn exactly how this spell works so that you can design encounters and situations that can withstand this spell—both in terms of its power and its ability to slow down the game. This is a valuable tool to have in your toolbox, and theory can only take you so far. Go out and experience it in play!
James Haeck is the lead writer for D&D Beyond, the co-author of the Critical Role Tal'Dorei Campaign Setting, and a freelance writer for Wizards of the Coast, the D&D Adventurers League, and Kobold Press. He lives in Seattle, Washington with his partner Hannah and his two CR 18 troublemakers, Mei and Marzipan. You can usually find him wasting time on Twitter at @jamesjhaeck.
Use average damage, allow pre-rolling. No problem. Unless you play online and the dm needs to stop the game for 5 minutes.
When I create a Druid (Barbarian is still standing in ToA, but backups are handy), I will go the route to cast this spell. However I will use it more as a "o crap we are all going to die" spell. For example, summon smaller creatures to separate us from the enemy and give us time to escape, or just something to grab attention for a while so the group can have time to potion up or get a turn not being attacked. Can be "OP" if used incorrectly, but could also be a lot of fun if used sensibly :)
"“I cast conjure animals!” declared the druid. Magic flashed in his eyes, and eight snarling wolves appeared around him, their fur shimmering with fey magic."
I love the way you demonstrate how evocative the spell is, how it can fit thematically and cinematic-ally into an encounter; it is a spell that deserves to exist.....
..........and then go on to explain all the reasons it should be banned. Having re-read some of your articles, I see you do this devils-advocate thing a lot. (The Eladrin article was probably the most misunderstood article on this site. Cudos, James.)
I have a proposed "solution" to the spell - consider (as the encounter/story dictates) allowing it to negate an equal number of CR beasties from the opposition. Summon 8 wolves? 8 of the goblins flee, chased by the wolves. Or perhaps they mob the ogre, slowly but surely ripping it to shreds over the course of the battle. If the PCs win, allow half the summoned creatures to have survived - a short rest will have them healthy again. If the summoned creatures are particularly poor/strong against a particular foe, let more survive, or increase the CR value of the enemy they negate...
As with much in D&D, the 'correct' solution for any problem is largely determined by the type of players at the table, and the type of game they wish to play. Even skirmish wargamer D&D players will be divided between those happy to handle each creature as an individual, and those groups who will gather them into small units.
The important thing to my mind is to keep the spotlight firmly on the PCs.
The conjure animals is even more troublesome if the Giant Poisonous Snakes are summoned; roll to hit, piercing damage roll, CON save, even if succes half damage so for each snake another 3d6 roll for poison and you can also summon eight of these so that's 48 rolls if they all hit.
One solution I have for all these "The DM needs to prepare extra things" conundrums is to not prepare extra. The rule at my table is, that the player needs to know how things work and needs to have the things read the DM needs to run the players spells. With conjure animals I would handle this as follows:
For the encounter itself I tend to follow many of the rules of James' article, so I have nothing to add here.
And if the players try to game the system by overwhelming numbers, go for area attacks and the like, or for a horde yourselfe. I do not follow the mantra of Encounters always having to be fair :D
If doing 8 summons, I'd highly suggest just using the standard damage values instead of rolling. That way it becomes roll to hit, total damage, CON save, total poison damage. That gets it down to 16 dice rolled instead of 48.
The Blog of Holding site suggested an interesting choice for large groups of identical creatures: roll one Attack for the group. To add nuance, assume 1/3 roll 5 lower, 1/3 roll 5 higher, and 1/3 roll the actual die result. This works for DMs using a big group of foes as well. Do the same with Saves and Ability/Skill checks. Use the suggested average damage to save time.
I love the suggestion of having the other players control some of the wolves, as long as they stay in the spirit of what would the summoner want them to do. I often let players control NPC allies to some degree if they are needed, to keep the players involved.
I also encourage players to have notes on their prepared/known spells so they don't have to crack open the PHB every round. This would be especially true for summon using casters. Keep note cards with the stats of the animals/fey/elementals/undead you are likely to summon. Your DM and fellow players will thank you.
Being a druid in our campaign and using this spell several times we found some ways that remedied our problems and worked for us.
1) all the animals are given the same command. if they all are to attack they must attack the same target, so splitting up unless allowed by dm.
2) fizzle method. for the two options that give cr 1/4 and cr 1/8 creatures, you roll a d4 for half the total possible. if its a 3 or higher, the creatures are summoned. since we implemented it, it has been rare to see a full 8 animals and even with the lesser amount it is still not a weak spell. As for casting it at higher levels, the fizzling rule applies for the two same CR 1/4, CR 18th, just roll for half the total amount that is possible. for example casting at 5th level mean a player could summon 16 CR 1/4 beasts. make them roll 8 d4. they get 8 for free and the others are unknown. ive used the spell at higher level and this was our fairest option. since i would have to burn the higher level spell i can concentrate on more summonings but i still could lose more as well.
hope this helps anyone. let me know if you try it in your game and if you liked it.
Oh...
My...
Moradin!
I've been doing that complete wrong for years! But I see now that, as Jeremy says, in a "Game of Exceptions" why that +5 with Advantage only applies to passive checks.
Thanks James!
I play as a druid and one of the ways we work it in to a fight is that I'll roll initiatives for any potential conjured animals while everyone is rolling initiative. It helps it inserting them quickly into combat and decreases confusion with the DM because he has it already written down just in case I end up casting it. To be fair, my favorite thing to conjure is 4 giant wasps. So, that really does cut down on some of the rolling. And, if I do conjure 8 animals, I've been known to cast it as 8 Pteranodons which the gnomes, halflings, and dwarves in the party can all then use as mounts and it creates a fun multi-leveled flying battle. It has a ton of uses that can really make the game more fun and interesting, as long as it's not abused and you work with your DM in how to properly incorporate it. If I do use it when the DM was setting up something more fun, he definitely will target me to break concentration (if just to level the playing field and have a more engaging battle).
Good article! Good thoughts and ideas.
I have been playing a druid for a few years now who absolutely loves this spell. I make sure that I minimise the time it takes out of the game.
To that end, I roll all attack dice just prior to my turn (have another player witness), use average damage and then let my DM know the results. They make all subsequent rolls (trip attacks etc) and then done. Not much more than a minute out of play time - which is about the same as a big damage spell like fireball. I have small numbered tokens for each of my critters that I can write HP on with a whiteboard marker.
‘Here’s something most people don’t know about conjure animals and similar spells: the caster doesn’t get to choose what creatures get summoned.”
People don’t know it because, because the spell doesn’t say it.
Choose one of the following options for what appears: “One beast of challenge rating 2 or lower”
This would indicate the spellcaster is choosing what appears, including the 'beast'. At no point does the spell imply that the GM decides, they only provide the stats.
I can certainly understand why Jeremy Crawford would say otherwise after the spell’s publication. It gives the player’s a great deal of battlefield control and combat effectiveness, perhaps too much for a 3rd level spell if uncountered.
The Wording of the spell is rather poor indeed. It also never states that the player chooses the creature either. It is very vague. But it has hence been clarified by Sage Advise. Normally I handle it at my table in Session 0. Summon Spells in general can be very disruptive to the flow of the game, therefore I like to talk about them ahead of the game.
I let my players summon whatever, they have to have the stats ready to go, and if they summon something that has innate spellcasting they don't get any fine control over the spells whatsoever. One of my players summoned all pixies and ordered them to polymorph and I let them know that the pixies seemed confused by specific instructions regarding polymorph and that he might get an unpredictable result if he went ahead with it. The party's wizard ended up as a swarm of rats, the druid became a hunter shark, one of the enemies got turned into a human child, one of the other ogres got turned into a warhorse
I did have to step away from RAW for that, but it was enjoyable at the table and it was never tried in combat again, they made use of it several times afterwards to escape though because it caused a great deal of havoc
I play a Druid in one of my campaigns, I don’t always summon 8 creatures, sometimes it’s more fun to summon 1 big one, but if we’re fighting a larger group it’s nice to even out the numbers. My dm has a good way of dealing with the larger groups though. If I were to summon 8 wolves, like in the example above, he’d split them into two groups, only make me roll once per group and then multiply the damage by 4. Much quicker than having to roll 16 dice.
I've gone over the math and average hit pools of the monsters from each CR and ruled that players can only summon 1 CR 2 or lower, 2 CR 1 or lower, 3 CR 1/2 or four CR 1/8 creatures as it gets you about as much HP either way.
I'm sorry but if the player doesn't get to choose their creature types, they will just stop using the spell. I think DM should set limitation to what beast can be chosen, but the caster should get to choose, or else the spell is nearly worthless. Those limitations should be along the lines of the druid beast shape tables and rules as laid out in XGTE, and perhaps those beast types should also be appropriate to the area. Sage Advice hinted at this in their own answer to this, beast being appropriate rather than random.
For what it's worth I'm playing a Circle of the Shepherd Druid in a game ATM.
I use a player created booklet I printed that has all the wild shapes listed with their relevant stat blocks sorted by CR to keep all my info together in the one place. My GM trusts me to choose which beasts get summoned, and I make sure not to abuse that trust and choose animals relevant to the terrain we're currently fighting in. Its my job to keep track of each creatures health, AC and attacks etc (luckily I have my handy dandy little booklet)
What we have done to streamline it at the table:
1. summoned creatures operate on my initiative- not their own.
2. The turn they are summoned they sac attack action and move action but still get their reaction (so I can use them to jam up enemies)
3. I use appropriate size bases with a dice on it to number which one is which for HP tracking purposes.
These 3 things coupled with me having all relevant stats open and available really make it easy for my party and games master. To give context, my GM has an egg timer that he threatens players who dither on their turns with. That egg timer has never been spent on me, even with 8 giant bats on the board.