Chapter 13: Building Combat Encounters
When creating a combat encounter, let your imagination run wild and build something your players will enjoy. Once you have the details figured out, use this section to adjust the difficulty of the encounter.
-
Combat Encounter Difficulty
There are four categories of encounter difficulty.
Easy. An easy encounter doesn’t tax the characters’ resources or put them in serious peril. They might lose a few hit points, but victory is pretty much guaranteed.
Medium. A medium encounter usually has one or two scary moments for the players, but the characters should emerge victorious with no casualties. One or more of them might need to use healing resources.
Hard. A hard encounter could go badly for the adventurers. Weaker characters might get taken out of the fight, and there’s a slim chance that one or more characters might die.
Deadly. A deadly encounter could be lethal for one or more player characters. Survival often requires good tactics and quick thinking, and the party risks defeat.
XP Thresholds by Character Level
Character Level ————— Encounter Difficulty ————— Easy Medium Hard Deadly 1st 25 50 75 100 2nd 50 100 150 200 3rd 75 150 225 400 4th 125 250 375 500 5th 250 500 750 1,100 6th 300 600 900 1,400 7th 350 750 1,100 1,700 8th 450 900 1,400 2,100 9th 550 1,100 1,600 2,400 10th 600 1,200 1,900 2,800 11th 800 1,600 2,400 3,600 12th 1,000 2,000 3,000 4,500 13th 1,100 2,200 3,400 5,100 14th 1,250 2,500 3,800 5,700 15th 1,400 2,800 4,300 6,400 16th 1,600 3,200 4,800 7,200 17th 2,000 3,900 5,900 8,800 18th 2,100 4,200 6,300 9,500 19th 2,400 4,900 7,300 10,900 20th 2,800 5,700 8,500 12,700 Evaluating Encounter Difficulty
Use the following method to gauge the difficulty of any combat encounter.
1. Determine XP Thresholds. First, determine the experience point (XP) thresholds for each character in the party. The XP Thresholds by Character Level table has four XP thresholds for each character level, one for each category of encounter difficulty. Use a character’s level to determine his or her XP thresholds. Repeat this process for every character in the party.
2. Determine the Party’s XP Threshold. For each category of encounter difficulty, add up the characters’ XP thresholds. This determines the party’s XP threshold. You’ll end up with four totals, one for each category of encounter difficulty.
For example, if your party includes three 3rd-level characters and one 2nd-level character, the party’s totaled XP thresholds would be as follows:
Easy: 275 XP (75 + 75 + 75 + 50)
Medium: 550 XP (150 + 150 + 150 + 100)
Hard: 825 XP (225 + 225 + 225 + 150)
Deadly: 1,400 XP (400 + 400 + 400 + 200)
Record the totals, because you can use them for every encounter in your adventure.
3. Total the Monsters’ XP. Add up the XP for all of the monsters in the encounter. Every monster has an XP value in its stat block.
4. Modify Total XP for Multiple Monsters. If the encounter includes more than one monster, apply a multiplier to the monsters’ total XP. The more monsters there are, the more attack rolls you’re making against the characters in a given round, and the more dangerous the encounter becomes. To correctly gauge an encounter’s difficulty, multiply the total XP of all the monsters in the encounter by the value given in the Encounter Multipliers table.
For example, if an encounter includes four monsters worth a total of 500 XP, you would multiply the total XP of the monsters by 2, for an adjusted value of 1,000 XP. This adjusted value is not what the monsters are worth in terms of XP; the adjusted value’s only purpose is to help you accurately assess the encounter’s difficulty.
When making this calculation, don’t count any monsters whose challenge rating is significantly below the average challenge rating of the other monsters in the group unless you think the weak monsters significantly contribute to the difficulty of the encounter.
Number of Monsters Multiplier 1 × 1 2 × 1.5 3–6 × 2 7-10 x 2.5 11-14 x 3 15 or more x 4
5. Compare XP. Compare the monsters’ adjusted XP value to the party’s XP thresholds. The closest threshold that is lower than the adjusted XP value of the monsters determines the encounter’s difficulty.
For example, an encounter with one bugbear and three hobgoblins has an adjusted XP value of 1,000, making it a hard encounter for a party of three 3rd-level characters and one 2nd-level character (which has a hard encounter threshold of 825 XP and a deadly encounter threshold of 1,400 XP).
Challenge Rating
When putting together an encounter or adventure, especially at lower levels, exercise caution when using monsters whose challenge rating is higher than the party’s average level. Such a creature might deal enough damage with a single action to take out adventurers of a lower level. For example, an ogre has a challenge rating of 2, but it can kill a 1st-level wizard with a single blow.
Party Size
The preceding guidelines assume that you have a party consisting of three to five adventurers.
If the party contains fewer than three characters, apply the next highest multiplier on the Encounter Multipliers table. For example, apply a multiplier of 1.5 when the characters fight a single monster, and a multiplier of 5 for groups of fifteen or more monsters.
If the party contains six or more characters, use the next lowest multiplier on the table. Use a multiplier of 0.5 for a single monster.
Multipart Encounters
Sometimes an encounter features multiple enemies that the party doesn’t face all at once. For example, monsters might come at the party in waves. For such encounters, treat each discrete part or wave as a separate encounter for the purpose of determining its difficulty.
A party can’t benefit from a short rest between parts of a multipart encounter, so they won’t be able to spend Hit Dice to regain hit points or recover any abilities that require a short rest to regain. As a rule, if the adjusted XP value for the monsters in a multipart encounter is higher than one-third of the party’s expected XP total for the adventuring day (see “The Adventuring Day,” below), the encounter is going to be tougher than the sum of its parts.
Building Encounters on a Budget
You can build an encounter if you know its desired difficulty. The party’s XP thresholds give you an XP budget that you can spend on monsters to build easy, medium, hard, and deadly encounters. Just remember that groups of monsters eat up more of that budget than their base XP values would indicate (see step 4).
For example, using the party from step 2, you can build a medium encounter by making sure that the adjusted XP value of the monsters is at least 550 XP (the party’s threshold for a medium encounter) and no more than 825 XP (the party’s threshold for a hard encounter). A single monster of challenge rating 3 (such as a manticore or owlbear) is worth 700 XP, so that’s one possibility. If you want a pair of monsters, each one will count for 1.5 times its base XP value. A pair of dire wolves (worth 200 XP each) have an adjusted XP value of 600, making them a medium encounter for the party as well.
To assist with this approach, the Monster Manual presents a list of all monsters organized by challenge rating.
The Adventuring Day
Assuming typical adventuring conditions and average luck, most adventuring parties can handle about six to eight medium or hard encounters in a day. If the adventure has more easy encounters, the adventurers can get through more. If it has more deadly encounters, they can handle fewer.
In the same way you figure out the difficulty of an encounter, you can use the XP values of monsters and other opponents in an adventure as a guideline for how far the party is likely to progress.
For each character in the party, use the Adventuring Day XP table to estimate how much XP that character is expected to earn in a day. Add together the values of all party members to get a total for the party’s adventuring day. This provides a rough estimate of the adjusted XP value for encounters the party can handle before the characters will need to take a long rest.
Adventuring Day XP
Level Adjusted XP per Day per Character 1st 300 2nd 600 3rd 1,200 4th 1,700 5th 3,500 6th 4,000 7th 5,000 8th 6,000 9th 7,500 10th 9,000 11th 10,500 12th 11,500 13th 13,500 14th 15,000 15th 18,000 16th 20,000 17th 25,000 18th 27,000 19th 30,000 20th 40,000 Short Rests
In general, over the course of a full adventuring day, the party will likely need to take two short rests, about one-third and two-thirds of the way through the day.
Modifying Encounter Difficulty
An encounter can be made easier or harder based on the choice of location and the situation.
Increase the difficulty of the encounter by one step (from easy to medium, for example) if the characters have a drawback that their enemies don’t. Reduce the difficulty by one step if the characters have a benefit that their enemies don’t. Any additional benefit or drawback pushes the encounter one step in the appropriate direction. If the characters have both a benefit and a drawback, the two cancel each other out.
Situational drawbacks include the following:
- The whole party is surprised, and the enemy isn’t.
- The enemy has cover, and the party doesn’t.
- The characters are unable to see the enemy.
- The characters are taking damage every round from some environmental effect or magical source, and the enemy isn’t.
- The characters are hanging from a rope, in the midst of scaling a sheer wall or cliff, stuck to the floor, or otherwise in a situation that greatly hinders their mobility or makes them sitting ducks.
Situational benefits are similar to drawbacks except that they benefit the characters instead of the enemy.
Fun Combat Encounters
The following features can add more fun and suspense to a combat encounter:
- Terrain features that pose inherent risks to both the characters and their enemies, such as a frayed rope bridge and pools of green slime
- Terrain features that provide a change of elevation, such as pits, stacks of empty crates, ledges, and balconies
- Features that either inspire or force characters and their enemies to move around, such as chandeliers, kegs of gunpowder or oil, and whirling blade traps
- Enemies in hard-to-reach locations or defensive positions, so that characters who normally attack at range are forced to move around the battlefield
- Different types of monsters working together